Our Mission
As an assemblage of a wide spectrum of disciplines, we are focused to provide quality client service with each and every endeavor.
MAS Accreditations
and registrations:
AIHA-LAP, A2LA, DEA, fda
Click Below To View The Certificates
- FDA Registered FEI 3011589416
Materials Analytical Services, LLC is an FDA registered testing facility.
Materials Analytical Services, LLC has received a Controlled Substance Registration Certificate from the United States Department of Justice Drug Enforcement Administration as a Testing Laboratory (Research Pharmacy). This registration allows Materials Analytical Services, LLC to store and test controlled substances under the following schedules: 2, 2N. 3, 3N, 4 and 5.
- Expires: January 31, 2023
American Association of Laboratory Accreditation (A2LA) has accredited Materials Analytical Services, LLC of Suwanee, GA for technical competence in the field of Chemical Testing. This laboratory is accredited accordance with the recognized International Standard ISO/IEC 17025:2017 General requirements for the competence of testing and calibration laboratories. This accreditation demonstrates technical competence for a defined scope and the operation of a laboratory quality management system (refer to joint ISO-ILAC-IAF Communique dated April 2017).
- Expires: December 31, 2023
In recognition of the successful completion of the A2LA evaluation process, accreditation is granted to this laboratory to perform the following tests on Toys, Office and School Furniture, and Building Materials (such as wallboard, fabric, carpeting, floor coverings, talc products, etc.):
- Total Lead (Pb) in Children’s Metal Products (Including Children’s Metal Jewelry) by ICP-OES according to Test Method EPA SW-846 Method 6010; CPSC-CH-E1001-08
- Total Lead (Pb) in Paint and Similar Surface Coatings and Non-metallic Children’s Products by ICP-OES according to Test Method EPA SW-846 Method 6010; 16 CFR 1303; CPSC-CH-E1003-09; CPSC-CH-E1002-08
- Phthalates (Di-n-butyl phthalate, Benzyl butyl phthalate, Bis(2-ethylhexyl)phthalate, Di-n-octyl phthalate, Diisononyl phthalate, Diiosodecyl phthalate) in Toys by GC-MS according to Test Method CPSC-CH-C1001-09
- Sampling and Analysis of Volatile Organic Compounds and Aldehyde Emissions of Furniture using Sampling Chambers, GC-MS, and HPLC according to Test Method BIFMA M7.1 (see certificate for analyte list)
- Sampling and Analysis of Volatile Organic Compounds and Aldehyde Emissions of Building Materials using Sampling Chambers, GC-MS, and HPLC according to California Dept. of Public Health (CDPH) Standard Method 01350 (see certificate for analyte list)
- Asbestos in Cosmetic Talc Products by PLM according to Blount prep method using heavy liquid separation: ISO 22261, ISO 22262
- Asbestos in Cosmetic Talc Products by TEM according to ISO 22262-1, ISO 22262-2
- Bulk Asbestos Analysis according to EPA-40 CFR Appendix E to Subpart E of Part 763, Interim Method of the Determination of Asbestos in Bulk Insulation Samples; EPA 600/R-98/116: Method for the Determination of Asbestos in Bulk Building Materials
- Airborne Asbestos Analysis according to U.S. “EPA’s Interim Transmission Electron Microscopy Analytical Methods-Mandatory and Nonmandatory-and Mandatory Section to Determine Completion of Response Actions” as found in 40 CFR, Part 763, Subpart E, Appendix A
AIHA Laboratory Accreditations Programs, LLC acknowledges that Materials Analytical Services, LLC of Suwanee, GA has fulfilled the requirements of the AIHA Laboratory Accreditation Programs (AIHA-LAP), LLC accreditation to the ISO/IEC 17025:2017 international standard, General Requirements for the Competence of Testing and Calibration Laboratories in the following Laboratory Accreditation Programs: Industrial Hygiene, Environmental Lead.
- Expires: August 1, 2025
Materials Analytical Services, LLC is approved for the specific fields of testing/methods listed in the table on the following Scopes of Accreditation (see link for method details):
- Industrial Hygiene Laboratory Accreditation Program (IHLAP)
- Chromatography Core
- Gas Chromatography: GC/FID
- Gas Chromatography: GC/ECD
- Gas Chromatography: Diffusive Samplers
- Ion Chromatography (IC)
- Liquid Chromatography: HPLC/UV
- Spectrometry Core:
- Inductively-Coupled Plasma: ICP/AES
- Asbestos/Fiber Microscopy Core:
- Phase Contrast Microscopy (PCM)
- Miscellaneous Core
- Environmental Lead Laboratory Accreditation Program (ELLAP)
- Lead in Paint
- Lead in Soil
- Lead in Settled Dust by Wipe
- Lead in Composited Wipes
- Lead in Airborne Dust
- Lead by EPA Method 12
- Elements by NIOSH 7300, NIOSH 7303, and NIOSH 9102
- Chromatography Core
American Association of Laboratory Accreditation (A2LA) has accredited Materials Analytical Services, LLC of Suwanee, GA. This product certification body is accredited in accordance with the recognized International Standard ISO/IEC 17065:2012 Requirements for bodies certifying products, processes and services. This accreditation demonstrates technical competence for a defined scope and the operation of a management system.
- Valid To: December 31, 2023
In recognition of the successful completion of the A2LA Product Certification Body Accreditation Program evaluation, accreditation is granted to Materials Analytical Services, LLC to certify products to the following product certification schemes under
MAS Certified Green:
- Product Type/Category
- Office Work Stations, Private & Open Plan
- Individual Office Furniture Components
- Office Seating
- Educational Seating
- Educational Desks and Workstations
- Dormitory, Residential, and Miscellaneous Furniture
- Mattresses and Bedding
- Standards/Requirements: Low-VOC Emitting: ANSI/BIFMA e3 Sustainability Standard Sections 7.6.1, 7.6.2 and 7.6.3 Low-VOC Emitting: ANSI/BIFMA M7.1 and X7.1
- Product Type/Category
- Interior Paints, Finishes & Coatings
- Interior Adhesives, Glues, Sealants, & Caulks
- Interior Flooring, Carpet, Rugs, & Underlayments
- Interior Ceiling, Wall, Wall Covering, Thermal & Acoustic Products
- Standards/Requirements: Low-VOC Emitting: CDPH/EHLB Standard Method
- Product Type/Category
- Interior Paints, Finishes and Coatings
- Standards/ Requirements: Low-VOC Content: CARB SCM, SCAQMD Rule 1113
- Product Type/Category
- Interior Adhesives, Glues, Sealants, & Caulks
- Standards/Requirements: Low-VOC Content: CARB SCM, SCAQMD Rule 1168
- Product Type/Category
- Exterior Adhesives, Sealants, Coatings, Roofing, Caulks & Waterproofing
- Standards/Requirements: Low-VOC Content: CARB SCM, SCAQMD Rule 1168
